Active Crossover

Specifications:
Model: SL-AX-1101H (1-ch, 1-way subwoofer electronic crossover) 
1) Level adjustment controlled 
2) 3-band crossover frequency switch
3) Adjustable crossover frequency: 20-1kHz
4) Typical mode: 80/125/250Hz 
5) Crossover slope: 12dB
6) S/N Ratio: ≥80dB
7) T.H.D: <0.02%@0.5~2.5V output
8) Supply voltage: 10-16V DC
9) Dimensions: 90(L) x 65(W) x 27(H) mm

Model: SL-AX-1101M
1) Typical mode: 50/80/125Hz

Model: SL-AX-1101L
1) Typical mode: 50/70/100Hz

Model: SL-AX-1201 (1-ch, 2-way subwoofer active electronic crossover)
1) Slope ratio: 12dB
2) Input/output ratio: 1:3
3) Distortion: <1.2%@1kHz
4) S/N ratio: ≥80dB
5) Supply voltage: 10-16V DC
6) Dimensions: 96(L) x 135(W) x 20(H) mm

Model: SL-AX-2100 (2-way electronic 18dB/Oct crossover)
1) Crossover frequency: 
    a) High-pass: 80/100/120/140Hz
    b) Low-pass: 50/80/100/120Hz
2) Low and high level input
3) Subwoofer phase shift switch (0/180)
4) Frequency response: 10-30kHz
5) S/N ratio: 100dB
6) Crossover slope: 18dB/Oct
7) T.H.D: 0.02%
8) Output gain: +5dB(1:4)
6) Dimensions: 110(L) x 180(W) x 50(H) mm

Model: SL-AX-2200 (2-way electronic crossover)
1) Power source 14.4 voltage, DC negative ground
2) Input current. 200mA max.
3) T.H.D: 0.05%@1V output level
4) Frequency response: 10-30kHz
5) S/N ratio: over 95dB
6) Separation: 60dB
7) Crossover frequency:
    a) High-pass: all pass/80/100/125Hz
    b) Low-pass: 50/63/80/100Hz
8) Crossover slope rate:
    a) High-pass 6dB or 18dB/Oct
    b) Low-pass: 18dB/Oct
9) Input impedance
    a) Pre-amp: 10k ohm 
    b) Speaker: 100 ohm 
10) Output impedance: 100 ohm  
11) Output voltage: 6V max.
12) Input/output gain: 1:2 (+6dB)
13) Dimensions: 110(L) x 157(W) x 30(H) mm

Model: SL-AX-3100 (2/3-way active crossover w/x10 frequency multiplier switch)
1) Power source: 9-15V DC
2) Input current: 1,000mA max.
3) Crossover slope: 12dB/Oct 
4) T.H.D: 0.05% at 1V output level@ 1kHz
5) Frequency response: 10-40kHz +/- 1dB
6) S/N ratio: over 102dB
7) Separation: 60dB
8) Crossover frequency:
    a) Front high pass: 50-8kHz
    b) Rear high pass or band pass: 50-8kHz
    c) Subwoofer: 5-800Hz
    d) Remote sub level: +10dB boost
9) Output impedance: 100 ohm 
10) Input/output gain: 1:2 (+6dB)
11) Max. output (10k ohm load): 4V RMS
12) High level input volt: 2-7.5V RMS
13) Low level input volt: 4V RMS
14) Dimensions: 142(L) x 175(W) x 32(H) mm

Model: SL-AX-3200 (5-channel active electronic crossover network)
1) Slope ratio: 12dB
2) Input impedance: 10k ohm 
3) Output impedance: 1k ohm 
4) S/N ratio: over 100dB
5) Distortion: <0.01%@1kHz
6) Power supply: 10-16V DC
7) Dimensions: 260(L) x 180(W) x 50(H) mm

Model: SL-AX-5100 (5-channel active electronic crossover network)
1) Slope ratio: 12dB
2) Input impedance: 10k ohm 
3) Output impedance: 1k ohm 
4) S/N ratio: over 100dB
5) Distortion: <0.01%@1kHz
6) Power supply: 10-16V DC
7) Dimensions: 260(L) x 180(W) x 50(H) mm

Model: SL-AX-5200 (1-channel, 2-way subwoofer active electronic crossover)
1) Slope ratio: 12dB
2) Input/output ratio: 1:3
3) S/N ratio: over 80dB 
4) Distortion: <0.02%@1kHz
5) Power supply: 10-16V DC
6) Dimensions: 135(L) x 96(W) x 20(H) mm